Firmware for Antminer S9/i/j

The mskminer.com AntMiner s9 / s9i / s9j firmware is suitable for all models. The first custom firmware with AsicBoost S9 saves up to 250 watts in pools supporting AsicBoost technology (slushpool, antpool, emcd.io, btc.com, f2pool and others) .
Acceleration of ASIC to 19 TH in air, up to 17.5TH on a standard APW3 ++ 1600w power supply.
Acceleration up to 19-25TH in immersion cooling.
Support chat https://t-do.ru/asicfw
Pro_v5.1_v28 - more stable than v29.

Download firmware

Firmware Antminer S9/i/j Pro_v5.1_v28
MD5 Checksum 2af7cea70de5649252d28096d56a1229
Antminer S9/i/j.tar.gz.tar.gz
Firmware Antminer S9/i/j v5.0pro rc8login root pass root@
MD5 Checksum cf6c2bd085c04f3b7dc77ff6a470b02a
Antminer S9/i/j Pro v50rc8.tar.gz
Firmware Antminer MSK 20Т S10 (s9 6 boards, downvolt) v5.1pro v10
MD5 Checksum 7bbddd4c2450acc9cf9fa2269d3839f4
Antminer S9/i/j Pro v516 boards v10.tar.gz
Firmware Hiveon S9/i/j
494826a7fb4f23d8543f44d8f23fdfb0
Antminer S9/i/j Hiveon.tar.gz
Firmware Hiveon S9dual (s10)
725e97099ae306f0952e93f014fe8f32

Alternative firmware for Antminer S9, S9i, S9j

Firmware from mskminer.com is available for free download, but it has a development fee of 1.3% -2% (mining is not interrupted, the development fee works in parallel with the main mining). Firmware from asicfw.io allows (at the same expense as the standard firmware from Bitmain) to get more computing power and extend the life of AntMiner by 5 times by setting each chip separately.

The design is made as close as possible to the original for more convenient use.

Firmware mskminer.com for S9 / S9i / S9j with frequency, voltage and acceleration patterns of each hash panel to 18+ TH in air and 19-22TH in immersion cooling. (Be careful, overclocking requires a more powerful power source. You can use 2 standard power supplies or 3 standard power supplies (1600 W) for 2 Antminers - you should not connect one hashboard to two different power sources !:

New developments:

The ssh vulnerability fix (dropbear)

S9 ssh is off by default! The default password for www and ssh has been changed to root@ - this is to prevent viruses from entering and this firmware can be used immediately in an infected network without fear of being instantly infected by neighboring hosts.

Refinement of the chip commit algorithm

We have implemented a fundamentally new chip start algorithm that allows us to achieve higher energy efficiency, and as a result - profitability.

The new algorithm of automatic operation of fans (adjustable) at which chips work better and reduced noise, adjustable chip temperature.

The algorithm of tuning of boards and chips is redesigned.

Security settings and antivirus.

a) virus detection and removal.
b) Protection against virus substitution of pools.
c) Ability to change SSH port. (Anti-virus resistance).
d) Warning if the API port is open to the entire network for recording (which can be used by attackers) and the ability to control access to it.
i) Backup firmware function. (if the main one was damaged by a virus).
f) It is recommended to change the SSH port.

Firmware Pro v5.0 (Pre) S9-S9i-S9j pre-release

Free, dev fee less than 2% 

Monitoring

Added output to Watchdog log (option showing time and cause of asyk restart).
Added time to the atotun runtime log.
Function of visual monitoring.
The option of the location of the asyk on the farm.
An option that enables the green LED to blink quickly in case of failure of one or more chips on the board.
Option that turns on blinking red LED blink rapidly in case the fan speed sensor fails (signal to replace it)
Closing vulnerabilities found in Bitmain firmware.
Loyalty program (to be added soon)
Redesigned devfee algorithm - became more profitable for the user, not exceeding 2% even on loss pools.
Standby mode when the Internet is turned off. (doesn't consume power in an empty mode as it happens on standard and other firmware).
Added setting of Vacdog time to fix the red chips after the tuna... Every 30 minutes... 1 hour 2 hours 3 hours.
Automatic shutdown function for broken boards with low hash rate or no hash rate at all to save electricity and heating costs.
S9 manual disconnection of any board.

Pro v.5.1 beta 25

    Modified Generate AutoConfig
    The Security page is implemented in Status miner
    Auto tuning changed.

Pro v.5.1 beta 5-19

    Protection against all viruses, firmware signature
    Replaced web server, closed all holes.
    Closed SSH
    Emergency profile - switch to profile in case of overheating
    Saving profile in configuration, fast switching
    Updated profiles and auto tuning algorithm, more energy efficient operation
    In the status of the miner added voltage, buttons to stop the mining, the search for an asynk by LED, restart, reboot
    Change in board voltage added to chip tuning page
    The profile switching schedule has been implemented
    Modified by Generate AutoConfig.

Pro v.5.0 rc8

    Added work compatibility after Antbuild virus treatment, virus blocking

Pro v.5.0 rc7 (24.06.19)

    function of automatic disconnection of bits with low or no hash rate on the board to save electricity and heating costs.

    manual disconnection of any board.

    ssh is off by default! The default password for www and ssh has been changed to root@ - this is done to prevent viruses from entering and this firmware can be used immediately in an infected network without fear of being instantly infected by neighboring asycks.

Pro v.5.0 rc6 (25.04.19)

    bmminer's rare hanging hook.

    Additional check for Watchdog

 

Pro v5.0 (6 boards)_rc2 (08.05.19)

    Added 2 modes for 2000 and 2200w. Up to 25th at 2000w on normal boards.

    Reworked auto tuning.

Pro v5.0 (6 boards) rc1 (29.04.19)

    Firmware for modified control board with9.

Pro v5.0 (Pre) rc5" (25.04.19)

    Added setting of Watchdog time to fix the red chips after the tuna... Every 30 minutes... 1 hour 2 hours 3 hours.
    Small interface clips.
    Fixed ssh (dropbear) vulnerability.
    Refinement of the chip locking algorithm

Pro v5.0 (Pre) rc2 (13.04.19)

    New chip start algorithm.
    New algorithm of automatic operation of fans (customizable)
    Adjustable chip temperature.
    Revamped tuning algorithm for boards and chips.
    Detection of a virus and its removal.
    Made protection against virus substitution of pools.
    Ability to change the SSH port. (antitheft of penetration of viruses).
    Warning if the API port is open to the entire network for recording and the ability to control access to it.
    Backup firmware function. (if the main one was damaged by a virus).
    Added output to Watchdog log (option showing time and cause of asyk restart).
    Added time to the Auto Tuning log.
    The option to locate the asyk on the farm.
    Option which includes an accelerated blink green LED in case of failure of one or more chips on the board.
    Option which turns on blinking red LED accelerated in case the fan speed sensor fails (signal for its replacement).
    Closing vulnerabilities found in bitmain firmware.
    Redesigned devfee algorithm - became more profitable for the user, not exceeding 2% even on loss pools.
    Standby mode on Internet shutdown. (doesn't consume power in an empty mode as it happens on standard and other firmware)".

v.004x b10" (02.12.18)

    Recycled auto tuning templates for asyk consumption.
    Added chiptun customization... Such as frequency reduction step and maximum restart number.

v.004x b9 (28.11.18)

    Added car rpm profile...old (quieter but also hotter) and new more efficient.

v.004 b8 (23.11.18)

    Fix of some Awesome Miner functions.
    Fix of working with btc tools, etc.
    Patch generator function for mass auto-tuning of all asycks at once Renamed to AutoConfig and now adds 2 octet Ip asycks to the thief. (For example: Alex ip 192.168.1.20 will generate an Alex.1x20 worm, etc.)
    small interface features.

v.004b (28.10.18)

    Optional Asicboost under immersion, with coolers off

v.004 (27.09.18)

    AsicBoost technology for all versions of S9/S9i/S9j
    Built-in Wattmeter
    Maximum frequency up to 1175
    Maximum power up to 2100W

v.003xw (29.09.18)

    Added display and hw chip prefix
    Customizable + hotel fee in menu

v.003g (18.06.18)

    Auto status update every 10 seconds.
    Decrease the frequency from -1 to -6 steps down in 1 press of all red chips.

v.003f (12.06.18)

    More stable launch.
    The chip speed is now displayed even when 1-2 boards are missing.
    Instead of an empty Temp(chip1) column, the PCB temperature is now

v.003e (03.06.18)

    Fixed bug: in the absence of a frequency in the config tried to start at 850.

v.003 (31.05.18)

    Tracking chip hash rate online and online, data is updated automatically
    Backlighting by different colors of different types of unstable chip operation
    Automatic chip stability tracking and correction function

v.002c (20.05.18)

    Added forced start of 100% of fan speed or auto mode.

v.002 (09.05.18)

    Restart with a low hash of 70% of the ideal.
    Restart at temperature (adjustable).
    More acceleration and downsworth profiles.
    Bugfixes

v.001 (08.05.18)

    Pay-per-view frequency control, voltages
    Templates for bost up up to 18.3TH

v.beta 2 (27.06.17)

    Payback acceleration

v. Alfa (04.05.17)

test

Download firmware

TOP