Firmware for Antminer T9+

Energy efficiency increased by 25% - t9 + up to 13.5 TN in air, 14-15 TN with immersion cooling;
    Automated settings for consumption or performance profiles;
    Selection of voltage and frequency on PCB automatically and manually;
    AsicBoost SHA256 on any pool supporting T9+ technology;
    Fine tuning of frequencies for each chip individually;
    A web-interface wattmeter is available through the API;
    Frequency up to 1175 MHz, may be above 850 MHz, but only for submerged cooling up to 14 + TN;
    Fan control, fan control shutdown for immersion cooling - no more need for cooler emulators;
    Watchdog timer by temperature and hashing speed;
    Parallel development of paid mining, without slacking and suspension of the main mining process;
    Compatible with all management and monitoring systems, API;
    Automation for mass firmware for S9 ASIC series - generation of patch (mini firmware with config) with all settings and mass update, autonomic numbering support adds to the employee 2nd octet IP-address ASIC (workername.0x23);
    Ability to redirect part of the device hashing speed (1-20%) to pay for services for host hotels and managers - Redirecting ASIC speed to an additional pool (for example: rent, electricity, etc.).

Download firmware

Firmware Antminer T9+ v5.1pro no SSH
MD5 Checksum da29ae3a665dd00e1f3f2f6abe1afcfa
Antminer T9+ v51noSsh.tar.gz
Firmware Antminer T9+ v5.1pro rc2
MD5 Checksum e788aaa240624f3ac93b2c6feb7bbac3
Antminer T9+ v50rc2.tar.gz
Firmware Hiveon ASIC T9+
3ed46392d58b80a57f0d2464ab0b783f

Alternative firmware for Antminer T9 +

Free custom firmware allows you to fully unlock all the features of your miner!
Development fee is no more than ~ 1.8% of the total hashing speed. And for large farms there are special conditions.

Update, v5pro rc1 changelog:

       1. Fixed ssh (dropbear) vulnerability.
       2. Refinement of the chip locking algorithm
       3. We have implemented a fundamentally new chip start algorithm that allows us to achieve higher energy efficiency and profitability.
    New algorithm of automatic operation of fans (customizable), in which the chips work better and reduced noise, adjustable temperature chips.
    Tuning algorithm of boards and chips is redesigned.
       4. Security settings and antivirus.
    - Detection of a virus and its removal.
    - Made protection against virus substitution of pools.
    - Ability to change the SSH port. (anti-virus protection).
    - Warning if the API port is open to the entire network for recording (which can be used by attackers) and the ability to control access to it.
    - Backup firmware feature. (if the main one was damaged by a virus).
    - It is recommended to change the SSH port.
    5. Monitoring .
    Added output to Watchdog log (option showing time and cause of asyk restart).
    Added time to the atotun runtime log.
       6. The function of visual monitoring.
    The option of the location of the asyk on the farm.
    Option which includes an accelerated blink of the green LED in case of failure of one or more chips on the board.
    Option that turns on blinking red LED blink rapidly in case the fan speed sensor fails (signal to replace it)
       7. Closing vulnerabilities found in bitmain firmware.
       8. Loyalty program (to be added soon)
       9. Redesigned devfee algorithm - became more profitable for the user, not exceeding 2% even on loss pools.
       10. Standby mode when the Internet is turned off. (does not consume power in an empty mode as it happens on standard and other firmware).
       11. Added setting of Vacdog time to fix the red chips after the tuna... Every 30 minutes... 1 hour, 2 hours, 3 hours.

Pro v5.0 rc2" (18.05.19)

    Fix of possible hanging bmminer
    Additional check on Watchdog

Pro v5.0 rc1 (05.05.19)

    (All S9 Pro features have been rescheduled).
    new chip start algorithm.
    New algorithm of automatic operation of fans (customizable)
    Adjustable chip temperature.
    Revamped tuning algorithm for boards and chips.
    Detection of a virus and its removal.
    Made protection against virus substitution of pools.
    Ability to change the SSH port. (antitheft of penetration of viruses).
    Warning if the API port is open to the entire network for recording and the ability to control access to it.
    Backup firmware function. (if the main one was damaged by a virus).
    Added output to Watchdog log (option showing time and cause of asyk restart).
    Added time to the Auto Tuning log.
    The option to locate the asyk on the farm.
    Option which includes an accelerated blink green LED in case of failure of one or more chips on the board.
    Option which turns on blinking red LED accelerated in case the fan speed sensor fails (signal for its replacement).
    Closing vulnerabilities found in bitmain firmware.
    Redesigned devfee algorithm - became more profitable for the user, not exceeding 2% even on loss pools.
    Standby mode on Internet shutdown. (doesn't consume power in an empty mode as it happens on standard and other firmware)".

"v.005x" (13.01.19)

    bug fix with manual adjustment of logic board frequency.
    Option not to show the fee pools... if they disturb you :)

v.004x (31.12.18)

    added all options from the latest version of S9 ( S9(i,j) v004 b10)
    Tracking chip's hash rate online and online, data is updated automatically
    multicolor lighting
    automatic chip stability tracking and correction function
    More stable launch.
    The chip speed is now displayed even when 1-2 boards are missing.
    Instead of an empty Temp(chip1) column, the PCB temperature is now displayed.
    auto status update every 10 seconds.
    Decrease the frequency from -1 to -6 steps down in 1 press of all red chips.
    Added chip display and hw chip prefix
    Customizable + hotel fee in menu
    Fix of some Awesome Miner functions.
    Fix of working with btc tools, etc.
    The patch generator function for mass auto-tuning of all asycuses has been renamed to AutoConfig and now adds 2 octettes of Ip asyc to the thief. (For example, Alex ip 192.168.1.20 will generate an Alex.1x20 worm, etc.)
    added car rpm profile...old (quieter but also hotter) and new more efficient.
    Reworked auto tuning templates for consumption of asyk.
    Added chiptun customization... Such as frequency reduction step and maximum restart number.
"

v.003x b4 (11.27.18)

    Fix for some awesome miner functions, possible drawdowns of speed on some pools.

v.003x b3 (11.16.18)

    Fixed hanging of some pools.
    Fixed pool emcd.io

v.002 AsicBoost, beta (10.29.18)

    Asik boost

v.002 (08/11/18)

    overclocking
    paid frequency and voltage control
    restart with a low hash rate of 70% of the ideal.
    restart at temperature (customizable).
    overclock and downvolt profiles.
    temperature dog and hashrate
    chip hash tracking on-line and online, data is updated automatically
    illumination with different colors of different types of unstable operation of chips
    automatic stability monitoring of chips and their correction
    Added the function of forcing 100% fan speed or auto mode.
    autotune with auto speed profiles or 100%
    Autofix chips - a new algorithm is being worked out.

Download firmware

TOP